- Making sure the mould hasn't followed while removing the prosthetic from the silicone.
- Make sure the area your applying the piece to is clean.
- Apply pros-aide ( Adhesive glue) to the area of skin and the back of the prosthetic piece.
- Make sure the pros-aide is completely dry, this will go transparent when it is ready.
- Both area's must be transparent before you apply the wound.
- Apply the wound with slight pressure making sure it has stuck completely onto the area.
- Begin to melt the edges away using alcohol and a cotton bud. Take your time don't rush.
- Once this is complete you can begin to apply colour with the alcohol active colour palette. You can use a supracolour palette if you wish.
- Make sure you put every detail you have referenced in your research.
- Take a photo once satisfied.
Product photos shown below for future references.
No comments:
Post a Comment